Fluke OF-500 OptiFiber Technical Reference Handbook Download Page 172

Page: 172 / 282

OF-500 OptiFiber Certifying OTDR

Technical Reference Handbook

6-28

Running the Test in Loopback Mode

Caution

If you disconnected the reference test cord from
the tester’s output, you must set the reference
again to ensure valid measurements.

Verify that the settings described in Table 6-1 are
appropriate. Let the tester warm up for 5 minutes.

Select Loss/Length mode: On the

HOME

screen, press

Change Test

; then select

Loss/Length

Clean the connectors on the cabling to be tested.

Connect the tester to the cabling as shown in Figure
6-10.

Press

to start the loss/length test.

To save the results, press

; select or create a

fiber ID; then press

again.

Loopback Mode Test Results

The

SUMMARY

screen, which appears when the test is

finished, is described in Table 6-6.

To see more detailed results, press

View Results

Table 6-7 describes the

RESULTS

screen.

Summary of Contents for OF-500 OptiFiber



























































































































































































































































































Search results

Summary of Contents for OF-500 OptiFiber

Reviews:

Brands by name

Popular brands

Fluke OF-500 OptiFiber, Technical Reference Handbook

Search results

Summary of Contents for OF-500 OptiFiber

Reviews:

Brands by name

Popular brands