manualshive.com logo in svg

Fluke OF-500 OptiFiber, Technical Reference Handbook

Share
Download
Fluke OF-500 OptiFiber Technical Reference Handbook Download Page 205

 

Memory Functions

 

 

Formatting a Memory Card 

9

 

 

 

9-3 

Table 9-1. Memory Status Screen Features 

Feature Description 

Memory Card or Internal 
Memory 

The memory status currently displayed. Press 

A

 to switch between the memory card 

and internal memory status. 

Memory Usage

 

This bar graph shows the space used in the current memory destination. For memory 
cards, this includes space used by files other than test records. For internal memory, this 
includes space used by the tester’s software and test limits. 

Saved Records

 

The number of records saved in the current memory destination. 

Available Memory

 

The approximate number of test records you can save in the memory destination. The 
exact number depends on the selected test mode, test limits, and other test settings, as 
well as the length of the cables you test. 

Bar graphs for test types: 

PM:

 Power Meter tests 

L/L:

 Loss/Length tests 

OTDR:

 Optical Time Domain 

Reflectometer and ChannelMap 
tests 

ENDFACE:

 FiberInspector images

 

The bar graphs show approximately how many of each type of test you can save. If you 
will be saving different types of tests in each record, you will have to estimate the 
available memory space based on the relative sizes of the tests. 

All bar graphs on this screen change from green to yellow to red as the available 
memory decreases. 

Summary of Contents for OF-500 OptiFiber



























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands