Fluke OF-500 OptiFiber, Technical Reference Handbook

Page: 35 / 282

Getting Acquainted
Basic Features
1
1-17
A
Model number of the installed module.
B
The current date and time.
C
Owner’s logo. See “Changing the Logo on the HOME
Screen” on page 1-26.
D
Battery status icon. For more information about the
battery, press
F
; then select
Battery Status
.
E
Press
E
to see the hardware and software versions and
calibration dates for the tester and the installed module.
F
Press
D
VFL
to activate the visual fault locator.
G
If the last test run was not saved, you can press
C
Unsaved Result
to see the test’s results.
H
Press
A Change Test
to switch test modes. See
K
.
I
Action prompts. For most screens, this area prompts
you on what keys to press.
J
Important test and job settings. To change these
settings, use
KLMN
to highlight a setting; then
press
t
. Selecting
TEST LIMIT
or
FIBER TYPE
lets
you change the item. Selecting the limit’s or type’s
name lets you see that item’s settings. You may also
access the tester’s settings by pressing
S
.
K
The test mode, which determines what type of test
will run when you press
T
. The available modes
depend on which module is installed. To change the
test mode, press
A Change Test
.
L
The name of the current screen.
Figure 1-5
.
Home Screen for OTDR with Loss/Length Option (cont.)