Festo CPX-FB23, Electronic Manual

Page: 7 / 122

Contents and general instructions
V
Festo P.BE−CPX−FB23−EN en 0308NH
Designated use
The field bus node type CPX−FB23 described in this manual
has been designed for use as a slave on the field bus system
Control & Communication Link (CC−Link) from Mitsubishi.
The CPX terminal may only be used as follows:
as intended in industrial installations.
without any modifications by the user
Only the conversions or modifications described in the
documentation supplied with the product are permitted.
in faultless technical condition.
The maximum values specified for pressures, temperatures,
electrical data, torques, etc. must not be exceeded.
Observe also the standards specified in the relevant chapters,
as well as national and local laws and technical regulations.
Target group
This manual is intended exclusively for technicians trained in
control and automation technology who have experience in
installing, commissioning, programming and diagnosing
slaves on the field bus CC−Link.
Service
Please consult your local Festo repair service if you have any
technical problems.