Festo CPX-FB23, Electronic Manual

Page: 47 / 122

2. Commissioning
2−3
Festo P.BE−CPX−FB23−EN en 0308NH
Contents of this chapter In this chapter you will find information on commissioning the
CPX terminal on the field bus CC−Link.
CPX terminal configuration and addressing
Bus configuration and addressing on the field bus CC−Link
You can adapt the reaction of the CPX terminal to the rel
evant requirements by parametrizing it with the handheld.
This enables e.g. the setting of debounce times or signal
lengthening.
Further information Before commissioning you must install the CPX terminal
correctly. Information on this can be found in chapter 1.
General information on commissioning CPX terminals as well
as a detailed description of the individual parameters can be
found in the CPX system manual (P.BE−CPX−SYS−..).
Information on commissioning the pneumatic interface and
I/O modules can be found in the manual for the CPX I/O
modules (P.BE−CPX−EA−..).
Instructions on commissioning the pneumatics can be found
in the relevant pneumatics manual.