Festo CPX-FB23, Electronic Manual

Page: 113 / 122

A. Technical appendix
A−9
Festo P.BE−CPX−FB23−EN en 0308NH
Module parameters of the input
modules types CPX−4DE and CPX−8DE Function no. Default setting
Monitoring the CPX module
Short circuit/overload in sensor supply (SCS)
4828 + m * 64
1)
Active
Reaction after short circuit/overload
Short circuit/overload in sensor supply (SCS)
4828 + m * 64 + 1
1)
Switch V
sen
on again
Input debounce time 4828 + m * 64 + 1
1)
3 ms
Signal lengthening time 4828 + m * 64 + 1
1)
15 ms
Signal lengthening channel x
1)
Channel−by−channel enable channel 0...7 4828 + m * 64 + 6
1)
Disabled
Force channel x
1)
Force mode inputs channel x
Force state inputs channel x
2)
Disabled
Reset signal
1)
m = module number (0...10; counting of the modules from left to right, beginning with 0)
x = channel number (0...7 for CPX−8DE, 0...3 for CPX−4DE)
2)
Access is made protocol−specific (see manual for handheld)
Tab.A/9: Parameters of the input modules
Module parameters for output modules
type CPX−4DA Function no. Default setting
Monitoring the CPX module
Short circuit/overload at outputs (SCO)
Undervoltage at outputs (V
out
)
4828 + m * 64
1)
Active
Active
Reaction after short circuit/overload
Short circuit/overload at outputs (SCO)
4828 + m * 64 +1
1)
V
out
remains switched off
Force channel x
1)
Force mode outputs channel x
Force state outputs channel x
2)
0 = disabled
0 = Reset signal
1)
m = module number (0...10; counting of the modules from left to right, beginning with 0)
x = channel number (0...3 for CPX−4DA)
2)
Access is made protocol−specific (see manual for handheld)
Tab.A/10: Parameters of the output modules