Festo CPX-FB23, Electronic Manual

Page: 31 / 122

1. Installation
1−17
Festo P.BE−CPX−FB23−EN en 0308NH
Setting the HOLD/CLEAR function
5
The reaction of the CPX terminal to faults or malfunctioning
can be configured.
With switch element 1 of the 2−element DIL switch 5 you can
set the HOLD/CLEAR function of the CPX terminal:
Operating mode Setting DIL switch 5.1
CLEAR
Logical communication outputs
are reset in the event of field
bus communication faults.
5.1: OFF
(factory setting)
HOLD
Logical communication outputs
remain set in the event of field
bus communication faults.
5.1: ON
Tab.1/9: HOLD/CLEAR
Further information on the HOLD/CLEAR function can be
found in the sections 2.3.1 and 3.5.