Festo CPX-FB23, Electronic Manual

Page: 112 / 122

A. Technical appendix
A−8
Festo P.BE−CPX−FB23−EN en 0308NH
Module parameter pneumatic interfaces
types CPX−GP−03−4.0 and CPX−GP−CPA−.. Function no. Default setting
Monitoring the CPX module
Undervoltage at valves (V
val
)
Short circuit at valves (SCV)
4828 + m * 64
1)
Active
Inactive
Monitoring wire fracture channel x
1)
Channel 0...7:
Channel 8...15:
Channel 16...23:
Channel 24...31: 4828 + m * 64 + 6
1)
4828 + m * 64 + 7
1)
4828 + m * 64 + 8
1)
4828 + m * 64 + 9
1)
Inactive
Force channel x
1)
Force mode outputs channel x
Force state outputs channel x
2)
Disabled
Reset signal
1)
m = module number (1...10; counting of the modules from left to right, beginning with 0)
x = channel number (valve number; 0...25: Midi/maxi 0...21: CPA)
2)
Access is made protocol−specific (see manual for handheld)
Tab.A/7: Parameters of the pneumatic interface
Module parameter MPA pneumatic
module types VMPA1−FB−EMG−8 and
VMPA1−FB−EMS−8 Function no. Default setting
Monitoring the CPX module
Undervoltage at valves (V
val
)
4828 + m * 64
1)
Active
Force channel x
1)
Force mode outputs channel x
Force state outputs channel x
2)
Disabled
Reset signal
1)
m = module number (1...17; counting of the modules from left to right, beginning with 0)
x = channel number (valve number; 0...7)
2)
Access is made protocol−specific (see manual for handheld)
Tab.A/8: Parameters of the MPA pneumatic modules