Festo CPX-FB23, Electronic Manual

Page: 22 / 122

1. Installation
1−8
Festo P.BE−CPX−FB23−EN en 0308NH
1.2.2 Setting the DIL switches
There are 5 DIL switches for configuring the field bus node.
These are situated under the DIL switch cover.
1
DIL switches 1 and 2:
Operating mode
and baud rate
2
DIL switch 2:
Baud rate
3
DIL switch 3:
CC link slave
address
4
DIL switch 4:
Number of stations
per slave
5
DIL switch 5:
HOLD/CLEAR,
System diagnosis
1 2 1 2
ON ON
1
2
3
1234
567
8
ON
1 2 1 2
ON ON
4
5
Fig.1/3: DIL switches in the field bus node
(further information on
1
...
5
see following pages)
Proceed as follows:
1. Switch off the power supply.
2. Remove the DIL switch cover (see section 1.2.1).
3. Set the DIL switches as described on the following pages.
4. Fit the DIL switch cover (tightening torque 0.4 Nm, see
section 1.2.1).