Festo CPX-FB23, Electronic Manual

Page: 19 / 122

1. Installation
1−5
Festo P.BE−CPX−FB23−EN en 0308NH
Electrical connecting and display elements
The following electrical connecting and display elements can
be found on the CPX field bus node for CC−Link:
1
Bus status and
CPX−specific LEDs
2
Field bus connec
tion (9−pin sub−D
socket)
3
DIL switch cover
4
Service interface
for handheld, etc.
3
4 1
2
RUN PS
PL
SF
M
SD
RD
Fig.1/1: Connecting and display elements on the CPX field bus node
Dismantling and fitting
The field bus node is fitted in a manifold sub−base of the CPX
terminal (see Fig.1/2).
Dismantling Dismantle the field bus node as follows:
1. Loosen the four screws of the field bus node with a Torx
screwdriver size T10.
2. Pull the field bus node carefully and without tilting away
from the contact rails of the manifold sub−base.