Festo CPX-CMAX-C1-1, Mounting, Installation And Diagnostics

Page: 132 / 176

5. Diagnostics and error handling
5−10
Festo P.BE−CPX−CMA X−SYS−EN en 0908NH
Malfunction group 1 Execution error
CPX error group 101 (CPX−MMI: [Execution error])
No. Message Cause/description Error handling Type
1)
10 Homing not executed Drive with incremental dis
placement encoder is not
referenced.
·
Carry out homing. Error
level: F1
Reset: R
11 Homing not required Homing for absolute dis
placement encoder.
·
Carry out homing. Error
level: F1
Reset: R
13 Incorrect direction of
movement during move
ment test Cylinder and valve have in
correct tubing connections.
·
Check the tubing connec
tions and, if necessary,
replace at the cylinder or
valve. Error
level: F2
Reset: R
14 Movement test not
executed. Positioning job without
valid movement test.
·
Carry out movement test
(recommended) or skip. Error
level: F2
Reset: R
15 Result of movement test
is ambiguous
Drive stuck.
·
Check the friction of the
drive and guide and, if
necessary, check the pres
sure build−up with trace.
Error
level: F1
Reset: R
Obstacle in the travel path.
·
Check the travel path and
software end positions.
Working pressure insuffi
cient to move the mass.
·
Set sufficient working
pressure and check the
configuration of the mass.
Cylinder not correctly
engineered.
·
Check size and, if
necessary, correct.
Valve defective.
·
Check pressure build−up
with trace, and exchange
valve, if necessary.
Tubing connection defec
tive.
·
Check the tubing connec
tion.
Valves (emergency stop) in
stalled between the valve
and cylinder are closed.
·
Open valves.
1)
For the error level and reset type, see section 5.2.3.