Farm King Model 1050, Operator And Parts Manual

Page: 86 / 174

84
Operation - 10" Backsaver Auger
adequate space for the auger to be lowered into the
transport position.
Stop the tractor and engage the parking brake.
Figure 141
Fully lower the auger until the upper lift arm (Item 1)
contacts the cradle rest (Item 2) [Figure 141] (both
sides).
Engage the tractor’s parking brake, stop the engine
and exit the tractor.
Figure 142
Remove the PTO driveline safety chain (Item 1).
Retract the collar (Item 2) [Figure 142] and slide the
PTO driveline off the tractor PTO shaft.
Figure 143
Place the PTO holder chain (Item 1) [Figure 143]
around the PTO driveline.
Fully raise the jack (Item 2) [Figure 143] and rotate
into the transport position (horizontal).
Verify that the auger is securely fastened to the
tractor / tow vehicle and that the hitch safety chain is
properly attached to the auger and tractor / tow
vehicle.
Verify that the SMV (Slow Moving Vehicle) sign is
attached and visible.
Verify that the amber lights are clean and operating
correctly.
Always lower the auger before transporting and allow
the weight of the auger to rest on the undercarriage
and not the hydraulic cylinders.
B-0671
1
2
AVOID INJURY OR DEATH
Before you leave the operator’s position:
• Always park on a flat level surface.
• Place all controls in NEUTRAL.
• Engage the park brake.
• Stop the engine and remove the key.
• Wait for all moving parts to stop.
B-0113 B-0112
2
1
B-0767
1
2