Farm King Model 1050, Operator And Parts Manual

Page: 51 / 174

49
Assembly - 10" Backsaver Auger
Figure 77
Install the intake spacer (Item 1) [Figure 77] on the
top of the input box.
Figure 78
Install one 1/4” x 13/32” ID x 1-1/4” OD washer (Item
1) in the four corners of the intake spacer (Item 2)
[Figure 78] .
Figure 79
Install the input box pivot (Item 1) inside the four 1/4”
x 13/32” ID x 1-1/4” OD washers. Align the mounting
holes and install one input box ring clamp (Item 2) and
one 3/8” x 1-1/2” bolt (Item 3) [Figure 79] at the four
corners of the intake spacer.
Tighten bolts to secure the input box pivot to the
input box.
NOTE: The input box pivot should rotate freely.
Install the plastic sleeve (Item 4) onto the input box
pivot. Install one clamp (Item 5) [Figure 79] and
tighten to secure the plastic sleeve to the intake auger
B-0708
1
B-0766
1
2
B-0715
1
2
3
4
5