86
MECHA C2 User’s Guide
v.02.5
© 2021 FANOTEC
Similarly for pages 3-8. For example, if the name of a preset is preceded by
a code found in the range 030-039, then this preset is automatically listed on
page 3, and so on.
To execute the above preset, press the
S
button when the preset name is
shown on the display, then press either the
>
or
<
button to specify the
direction of rotation.
The code used in the preset name is a
preset power code
explained in the
section
Although the power code used in the name of the presets shown in C2’s
Preset (P) Menu
consists of only 3 digits, longer codes can be used in a preset
name. These presets cannot be displayed in the menu, but can be executed
using the menu, as we will see below.
Using a preset name as a base name
●
Suppose we have a preset to shoot a common spherical panorama and
its name is
020 kit-lens-pano
. Since 020 is in the range 020-089, we can
use
020 kit-lens-pano
as a base name. We also know how to execute this
type of preset, as we have shown this before.
●
If we create another preset and give it a similar name adding a number
in the range 1-3 after the code 020:
020
3
kit-lens-pano
, this preset can be executed as follows:
In short
, to be able to see in C2’s
Preset Menu
a preset created in the
User Interface, access the User Interface and rename the preset
adding a code from the range 020-089 and a space to the beginning
of the preset name.
When the name of a preset begins with a code in the range 020-089,
then it can be used as a
base name
.
