68
MECHA C2 User’s Guide
v.02.5
© 2021 FANOTEC
Leveling Amount [deg]
— The angle at which the upper rail is rotated after
powering on, if you press the
/
button when the display shows
-+=
. Right
after the rotation, this angle can be edited in the C2’s menu, with the
possibility to omit the confirmation of the change, meaning that you can
press the
P
button instead of pressing the
S
button as usual. This means
that the new value is only available during the current work session, until
MECHA is powered off.
Zenith / Nadir Position [deg] — The default values are 90° and -90°. Other
values may be useful for backlash reasons or to have a certain overlap.
MECHA will use these values in scripts that contain Z and N.
Favorite Codes
The above settings allow you to assign two of your favorite codes to the
-
and
+
buttons, respectively, as follow:
●
FavCode 1
to the
-
button
●
FavCode 2
to the
+
button
These are shortcuts that allow a quick use of codes by long pressing the
corresponding button. See the
at the end of the guide.
Battery Voltage
