In both cases will be a pause of 2 seconds after each shot (
p=2
).
Let's now explain the above examples and see how you can modify them to
create your own preset.
The
parameters passed in the url
are as follows:
●
The first parameter is
b
and refers to the button to which the preset will
be assigned. Possible values are 1, 2, and 3, because MECHA has three
numerical buttons,
-
,
+
, and
=
. There are no numbers displayed on
these buttons of C2 controller, but you may remember that they are also
used to enter the numbers 1, 2 and 3, respectively. This parameter is
required
.
●
The second parameter –
s
– is the number of shots around; the third
parameter can be used instead.
●
The third parameter is the focal length –
f
– and it is optional. If you
provide this parameter, the panorama will be spherical, otherwise it will
be cylindrical.
●
The fourth parameter –
p
– is the pause after each shot, and it is optional.
The default value is 1 second.
●
Starting with firmware version
(1)2134
, you can use
h
and
v
parameters
to specify, in degrees, the area of a partial panorama. For example:
192.168.8.1/preset?b=1&f=80&h=100&v=75
Above is the url for a partial panorama for
80
mm lens,
100
° wide and
75
°
tall.
For example, a
url with two parameters
looks like this:
192.168.8.1/preset?b=1&s=12
Now, all you have to do is replace the values in this example with the desired
values. For example, for
6 shots around
:
192.168.8.1/preset?b=1&s=6
and for a
full spherical panorama
for a
50
mm lens (FF equiv.):
192.168.8.1/preset?b=1&f=50
78
MECHA C2 User’s Guide
v.02.5
© 2021 FANOTEC
