Fanotec MECHA C2, User Manual

Page: 49 / 122

49
MECHA C2 User’s Guide v.02.5
© 2021 FANOTEC
User Interface (UI)
UI Controls
In this chapter, we will explain the functions of the buttons and the options
available on the Row page. Ring and Turn pages are quite similar to Row .
Access the User Interface as shown in the chapter How to Access the UI , and
tap/click the [Row] button to access the Row page.
● Tap/click the [info] button, at the top of the Row page, to show the
descriptions for all the controls. At the same time, three more buttons
are displayed at the top of the page – [HELP] , [Config] , and [NEW] – for
accessing the following pages:
○ Help — Useful information and codes. See the Current Codes List at
the end of the guide.
○ Configuration page — User: admin , and default password: Mecha .
○ What’s new? — The page where you can find information about the
current firmware version and the versions published so far.
● Level of complexity — Next to the [info] button there is a list of options to
set the level of complexity for the User Interface, from the simplest ( S1 )
to the most complex ( A3 ). Select A3 to show all the controls.
● Firmware version — Under the Row label, note the current firmware
version, (1)2250 in our example (images shown in this guide may not be
an exact representation of the current firmware version). Click this tag to
access the What's new? page.
● Battery voltage — At the right side of the page, see the battery voltage.
Set the minimum and maximum voltage values in the Configuration page
to display percentages instead of voltage.
● Hand symbol — Toggles gesture mode. Tap the screen and drag to see
how it works. Always make sure there are no objects near the robot,
especially in gesture mode.