7
MECHA C2 User’s Guide
v.02.5
© 2021 FANOTEC
WARNINGS
WARNINGS to Dual Axis MECHA Users
●
Test MECHA WITHOUT a camera mounted first!
●
Please test for camera clearance before running any program.
●
Test any preset supplied or adjusted WITHOUT a camera mounted FIRST,
especially when the clearance is not enough.
●
CHECK for clearance with shutter cable attached!
●
Use short cable with extreme caution.
●
The power button,
P
, can always be used as an emergency stop, except
for the
procedure.
●
If the movement is not as expected, or there is any danger for the
moving parts to hit something, please press
P
, the power button of
MECHA, to stop the movement immediately.
In this user guide, we assume that some settings on the
Configuration
page – such as the rotation intervals for the
<>/\
buttons – have their default values.
So when we say „
Press
/
then quickly press
+
for a rotation of
90°...
”, this statement is valid if
Arrow buttons Interval 2
is indeed
90°.
!
