95
MECHA C2 User’s Guide
v.02.5
© 2021 FANOTEC
If MECHA is in
parked
position, we need a pause to adjust the camera
settings right after MECHA arrives in horizontal orientation for the first
horizontal row.
SP,P0x1,P0x12,45x10,-45x10,N,ZZ
Let's Take a more Dense Approach with more Photos
toward Gigapixel Imagery
Suppose we want a shooting sequence made out of rows at a tilt of 15° –
instead of 45°, as we had before:
SL,0x36,15x32,30x28,45x24,60x20,-15x32,-30x28,
-45x24,-60x20
● SL
: Start Level
● 0x36
: first row at a tilt of 0° (horizontally) made out of 36 positions
● 15x32
: one row at a tilt of 15° of 32 positions
● 30x28
: one row at a tilt of 30° of 28 positions
● 45x24
: one row at a tilt of 45° of 24 positions
● 60x20
: one row at a tilt of 60° of 20 positions
The same for the negative tilts:
● -15x32
: one row at a tilt of -15° of 32 positions
● -30x28
: one row at a tilt of -30° of 28 positions
● -45x24
: one row at a tilt of -45° of 24 positions
● -60x20
: one row at a tilt of -60° of 20 positions
Because there are many shots to be taken, it will take a while.
Now, suppose we want only a vertical slice of it, of
45 degrees
, a kind of
preview, also to test overlap and to see if the full 360° around can be used in
production, or just simply as a partial panorama 45° degrees wide, instead
of 360°, with the same camera-lens combo.
To achieve this, we need to add
(45)
, which tells MECHA that only a bit over
45 degrees should be taken.
The resulting MSS script will be:
