112
MECHA C2 User’s Guide
v.02.5
© 2021 FANOTEC
MECHA’s S (Shots) Language
The S Language requires the firmware
(1)2054
or newer.
In this chapter we will explain how to make a script for your desired pattern
of shooting.
The S language is Shots oriented, and it can be used for both single axis and
dual axis applications.
Access the
Row
page using the User Interface, and select
Scripted
. As a result,
a blank text area is displayed in which you will write the script.
The script starts with the initial position of MECHA, as follows:
S={position in degrees}
For dual axis applications, we commonly have 3 possible start positions:
level
,
parked
, and
raised
. To go from a position to another, please see the
and
Parked, Level and Raised Positions
sections at the
beginning of this guide.
Please note that usually MECHA’s position refers to the position/
orientation of the rail/device controlled by MECHA.
