Fanotec MECHA C2, User Manual

Page: 23 / 122

23
MECHA C2 User’s Guide v.02.5
© 2021 FANOTEC
Creating a preset in C2’s Menu Mode
Creating a preset in C2’s Menu Mode is very simple, fast and preferable when
you do not want to access the User Interface for various reasons. The preset
can be used immediately to shoot a panorama and it can also be edited later
or deleted if no longer needed.
● In the Preset (P) Menu , use the
\
button to find an empty option, for
example 024 EMPTY .
● Press the
+
button to enter edit mode and adjust the preset
parameters, which are:
○ Focal length ( 50mm – in the first image above) alternates with
Number of shots ( 12sh – in the second image above) and AUTO ;
press the
/
button to toggle between the three parameters.
○ Number of camera triggers in each position . T1 means one trigger
action. For example, if you increase the value to 3 ( T3 ) using the
+
button, there will be 3 trigger actions in each position.
○ Exposure (in seconds). E1/2 means an exposure of half a second. If
you try to decrease the value below zero, notice that shutter/button
confirmations options are displayd instead – E: SHT C., E: SHT C1, E: BTN
> C, E: BTN > C1 – which are explained in the User Interface chapter.
○ Image overlap (percent). Values in the range 5-80% are allowed, or
go to the next parameter if you do not want to change the current
value.
Press the
=
button to find out information about a flashing
parameter – explained show (the third image above) – and press it
again to return to the concise show .
Use the
-+
buttons to adjust the current value.
Use the
>
button to go to the next parameter.