18
MECHA C2 User’s Guide
v.02.5
© 2021 FANOTEC
Use the
P
button to exit.
Parked, Level and Raised Positions
The
mentioned above are very helpful when the upper rail
needs to be in a certain position. The basic positions required for presets are
shown in the image below, and they are:
If the above simple rotations do not work as expected, the
rotators in use may not be set correctly (see Set the Rotator
Using C2’s Menu), or the intervals
1[-]
,
2[+]
and
3[=]
are not the
default ones in the
Config Menu
or on the
Configuration
page.
!
Adjust
the position
using
/\
buttons
to match
the preset
before starting
the preset.
The naming conventions
for starting and ending positions
for dual axis presets available via
More from Server...
Level
Parked
Raised
When you press the
P
button and the battery percentage is shown
on the display, you can also perform simple rotations.
