Fanotec MECHA C2 User Manual Download Page 41

Page: 41 / 122

MECHA C2 User’s Guide

v.02.5

So now you can set button intervals freely, as there is

and and

for 90º rotations.

Backlash compensation options
●

BACKLASH 1 COMPENSATION

— Compensation of backlash for the

lower

rotator.

●

BACKLASH 2 COMPENSATION

— Compensation of backlash for the

upper

rotator.

The purpose of backlash compensation is to improve the precision of left-

right and up-down movements, and it can be performed after a long

period of use.

Press the

button to start the backlash compensation procedure and

wait until the power button symbol start flashing on the display, then press
the

button when you notice that MECHA starts moving very slightly to

the left.

●

i3 REAL MOVE 1 / 2

— This is the length of a path traveled by a REAL

device controlled by the Rotator 1/2 for a certain amount of rotation

performed by MECHA. See the

REAL MOVE

option for more details. Press

either

button to enter edit mode and adjust its value.

●

ZENITH / NADIR POS.

— Press either

button to enter edit

mode if you need to change the default values, which are 90° and -90°.

Other values may be useful for backlash reasons or to have a certain

overlap. MECHA will use these values in scripts that contain Z and N.

●

UPDATE

— Press the

button to re-update the current firmware.

MECHA will use the latest data connection available to connect to the

internet.

●

REBOOT

— Press the

button to reboot MECHA without power cycling

it.

●

FIRMWARE VERSION

— Press the

button to show the current

firmware version.

●

UPDATE USING H-SPOT

— Press the

button to update the firmware

using a hot-spot with the name

MECHA-UPDATE

and (default)

password

87654321

, which needs to be created and active before using

this option (see

Firmware Update Using a Hot-spot

Summary of Contents for MECHA C2



























































































































Search results

Summary of Contents for MECHA C2

Reviews:

Brands by name

Popular brands

Fanotec MECHA C2, User Manual

Search results

Summary of Contents for MECHA C2

Reviews:

Brands by name

Popular brands