Fanotec MECHA C2 User Manual Download Page 32

Page: 32 / 122

MECHA C2 User’s Guide

v.02.5

Test without Camera – Raised Position

With the upper rail in the

raised

position, as

shown in the image on the right, select the

PANORAMA TEST PARKED

option:

Press the

button to confirm.

This option tells the MECHA C2 to execute a

panorama to the left or right, as follows: 12

shots around, 3 rows ‒ at 0° and +/- 45° ‒ plus

zenith and nadir, starting from

raised

position.

Panorama with

Camera Mounted

If the above tests are successful,

repeat at least one of them with a

camera mounted.
Mount the camera on the upper

rail, using the camera mounting

knob shown in the image on the

right.
Plug the right shutter cable for the

camera in use into the Camera Port

(CAM). This allows the triggering of

the shutter automatically.

Summary of Contents for MECHA C2



























































































































Search results

Summary of Contents for MECHA C2

Reviews:

Brands by name

Popular brands

Fanotec MECHA C2, User Manual

Search results

Summary of Contents for MECHA C2

Reviews:

Brands by name

Popular brands