84
MECHA C2 User’s Guide
v.02.5
© 2021 FANOTEC
1. Tap/click the
[Save]
button to save the preset with a different name, or
with the same name if it is a presets that can be overwritten.
The preset name can be preceded by a power code of maximum 7 digits.
This feature also allows you to execute the preset using MECHA’s
buttons. For example, if the preset name is
01
C2 6 shots
:
○
use
P->
to execute the preset to the right,
○
use
P-<
to execute the preset to the left.
Preset Power Code
2. Tap/click the
[Save 1]
button to overwrite the preset with the name
Button 1
, assigned to the
-
button.
3. Tap/click the
[Save 2]
button to overwrite the preset with the name
Button 2
, assigned to the
+
button.
4. Tap/click the
[Save 3]
button to overwrite the preset with the name
Button 3
, assigned to the
=
button.
Now the new preset is saved and displayed in the
Presets
list and ready to be
used in the future.
Create a
preset power code
as follows:
●
the first digit must be
0
(zero) (remember that every power code
starts with zero)
●
the next sequence of maximum six digits must be a combination
of the digits
1
,
2
, or
3
, so that two identical digits are not in
consecutive positions.
Example: 01, 023, 0123, 02123, 0123123 etc.
