EZ-GO ST 4X4, Technician'S Repair And Service Manual

Page: 124 / 184

FRONT SUSPENSION AND STEERING
Page J-10
Repair and Service Manual
Read all of Section B and this section before attempting any procedure. Pay particular attention to all Notes, Cautions and Warnings
Replace the front wheels per WHEELS AND TIRES sec-
tion and lower vehicle. Steering Wheel Replacement
Do not center punch steering shaft.
Using 1/16" drill bit, drill a small indent
in the steering shaft to locate steering wheel puller.
When installing steering wheel, apply commer-
cially available Anti-Seize compound on all
splines.
Tool List Qty. Required
Ratchet, 1/2" drive .......................................................1
Torque wrench, 1/2" drive, 165 ft. lbs capacity ............ 1
Socket, 3/4", 1/2" drive ................................................ 1
Adjustable wrench, 10" ................................................ 1
Drill (electric or air), 3/8" .............................................. 1
Drill bit, 1/16" ............................................................... 1
Straight blade screwdriver (small) ............................... 1
Steering wheel puller ................................................... 1
Fig. 12 Steering Assembly Replacement
1
2
7
4
6
9
8
5
3
ITEM NO TORQUE SPECIFICATION
1 13 - 18 ft.lbs (18 - 24 Nm)
6 13 - 15 ft.lbs (18 - 20 Nm)
9 13 - 15 ft.lbs (18 - 20 Nm)