Extreme Networks Summit 200-24, Hardware Installation Manual

Page: 92 / 386

92 Extreme Networks Consolidated "i" and "e" Series Hardware Installation Guide
Summit Switch Models
Figure 41: Rear view of the Summit5i switch
The rear panel of the Summit5i switch includes two AC power sockets, a system label, a reset button, an
Ethernet management port, and a serial console port.
LEDs
All three Summit5i models have the following LEDs:
• Unit status
• Management
• Port status
• Port speed
• Ethernet management port (on the rear panel)
For information about the LEDs and their activity on the Summit5i switch, see “Summit1i, Summit5i,
Summit7i, and Summit48i Switch LEDs” on page 97.
GBIC Ports
All three Summit5i switch models provide four unpopulated GBIC ports with SC connectors. You can
use the following GBICs in the Summit5i switch:
• 1000BASE-SX
• 1000BASE-LX
• 1000BASE-LX70
• ZX GBIC
• LX100
• UTP GBIC
For more information about the supported GBIC types, see “GBIC Type and Hardware/Software
Support” on page 23. For specifications of individual GBIC models, see “GBIC Specifications” on
page 338.
Power Sockets
The Summit5i switch has built-in dual redundant power supplies. Each power supply has its own
power socket. When the second power supply is connected to a second independent power source, both
SHG_Rr5
AC Connectors Console port
Ethernet port
Reset button Label