Extreme Networks Summit 200-24, Hardware Installation Manual

Page: 112 / 386

112 Extreme Networks Consolidated "i" and "e" Series Hardware Installation Guide
Summit Switch Installation
Placing the Switch on a Table or Shelf
You can place up to four Summit switches on top of one another.
The Summit switch comes with four self-adhesive rubber pads. Apply the pads to the underside of each
switch, placing a pad at each marked corner of the switch. Place the switches on top of one another,
ensuring that the corners align.
Installing a Summit Stacked Configuration
Summit “ e ” series switches can be installed in a stacked configuration that functions as a single switch
entity for management. The Summit “ e ” series switches that support stacking are the Summit 200 series
switches, Summit 400 series switches, and the Summit 300-24 switch.
For information about determining the number of switches allowed in a stack, see “Maximum Switches
in a Stack” on page 41.
Figure 56 shows a typical stacked configuration using Summit 400 series switches, and figure shows a
typical stacked configuration using Summit 200 and 300 series switches.
Figure 56: Typical Summit 400 series stacked configuration
EW75001