Extreme Networks Summit 200-24, Hardware Installation Manual

Page: 107 / 386

Extreme Networks Consolidated "i" and "e" Series Hardware Installation Guide 107
4
Summit Switch Installation
This chapter describes how to install Summit switches and optional equipment.
You can mount the Summit switch in a rack or place it free-standing on a tabletop.
This chapter describes:
• Mounting the Switch in a Rack on page 108
• Placing the Switch on a Table or Shelf on page 112
• Installing a Summit Stacked Configuration on page 112
• Verifying a Successful Installation on page 114
• Removing the Switch from a Rack on page 115
NOTE
Read the information in this chapter thoroughly before you attempt to install or remove any Summit
switch or before you attempt to install or remove the Summit48si power supplies.
CAUTION
Use of controls or adjustments of performance or procedures other than those specified herein can
result in hazardous radiation exposure.
Installation Summary
Installing a Summit switch includes the following tasks:
1 Mount the switch in a rack (see next section) or set it on a table or appropriate shelf (page 112).
2 If necessary, install additional power supplies (Chapter 5)
• External AC power supply for the Summit 300-24
• Redundant internal AC power supply for the Summit 300-48t or Summit48si
• Redundant DC power supply for the Summit48si
3 Connect power cables to the switch. If there is a power switch, move it to the on position.
4 Verify successful installation (page 114).