Extreme Networks Summit 200-24, Hardware Installation Manual

Page: 62 / 386

62 Extreme Networks Consolidated "i" and "e" Series Hardware Installation Guide
Summit Switch Models
Figure 19: Summit 200-48 switch front view
Figure 20: Summit 200-48 switch rear view
All the ports on the Summit 200 series switch have associated port activity LEDs. In addition, three
LEDs indicate status for the switch, fans, and power supply. The Summit 200-24 switches also have an
LED to indicate the unit ID when the switch is connected in a stacked configuration.
The rear of the Summit 200 series switch provides the AC power connection and air circulation vents.
A system label that lists the serial number and the unique Ethernet MAC address assigned to this
device is on the back of the Summit 200-24 and Summit 200-48 seitches and on the side of the Summit
200-24fx switch. Use the serial number for fault reporting.
The Summit 200 switch automatically adjusts to the supply voltage. The power supply operates down
to 90 V.
NOTE
The Summit 200 switch certification and safety label is located on the bottom of the switch.
Summit 200 Switch LEDs
Table 11 describes the LED activity for all three models of the Summit 200 switch.
LC48001
10/100 Mbps ports
Console
port
1000-baseT ports
Mini-GBIC ports
LC48002
Power socket