Extreme Networks Summit 200-24, Hardware Installation Manual

Page: 130 / 386

130 Extreme Networks Consolidated "i" and "e" Series Hardware Installation Guide
Installing and Connecting Summit Power Supplies
Figure 69: Attaching the retaining bracket using spacers
Figure 70: Attaching the retaining bracket to the power socket
6 Attach the retaining bracket to the power supply in one of the following ways:
• If you removed retaining screws from the power socket, use those screws to attach the
• For power supplies with permanently attached standoffs, attach the retaining bracket to the
power supply using the bracket screws, as shown in Figure 68.
• For power supplies without permanently attached standoffs, use the supplied spacers between
the bracket and the power supply, as shown in Figure 69.
LB48024
Bracket screws
Spacers
SH_001
Retaining bracket screw