Extreme Networks Summit 200-24, Hardware Installation Manual

Page: 117 / 386

Extreme Networks Consolidated "i" and "e" Series Hardware Installation Guide 117
5
Installing and Connecting Summit
Power Supplies
The Summit switch models are shipped with internal power supplies that supply all the power needed
for most switch operation. To provide full power support for PoE operation, you can connect external
redundant power supplies to the Summit 300-24, the Summit 400-24p, the Summit 400-24t, and the
Summit 400-48t.
The Summit 300-48 switch is shipped with one installed 600-Watt power supply. If a switch has only
one power supply installed, you can add a second power supply to provide power load sharing and
increased support for PoE operation.
The Summit48si switch is shipped with one installed AC or DC power supply. You can add a second
power supply to provide power load sharing.
This chapter includes the following topics:
• Installing or Removing an External Power Supply 45019 (EPS-LD) on page 118
• Installing and Removing the Internal 600 Watt AC Power Supply (15412) on page 121
• Installing and Removing Summit48si AC Power Supplies on page 127
• Installing the AC Power Cable Retaining Bracket on page 128
• Installing the Summit48si Switch DC Power Supply on page 132
NOTE
Read the information in this chapter thoroughly before you attempt to install or remove any of the
Summit power supplies.
CAUTION
Use of controls or adjustments of performance or procedures other than those specified herein can