Extreme Networks Summit 200-24, Hardware Installation Manual

Page: 317 / 386

Extreme Networks Consolidated "i" and "e" Series Hardware Installation Guide 317
B
Switch Technical Specifications
This appendix describes the hardware technical specifications for “ e ” and “i” series of Extreme Network
switches. The appendix is organized into the following sections:
• Common Switch Specifications on page 317
• Summit 200 Series Switch Specifications on page 321
• Summit 300 Series Switch Specifications on page 323
• Summit 400 Series Switch Specifications on page 326
• Summit “i” Series Switch Specifications on page 327
• Alpine 3800 Series Switch Specifications on page 329
• BlackDiamond 6800 Series Switch Specifications on page 331
• Power Connector Specifications on page 334
For information about the software technical specifications including protocols, MIBs, and standards,
see the
ExtremeWare Software Users Guide .
Common Switch Specifications
Table 64 lists specifications for environmental requirements, safety, electromagnetic interference, and
certification marks that apply to all the Extreme Networks switches. “Console Port Cables” on page 319
provides information about the cables used to connect console ports on Extreme Networks switches.
Table 64: Common switch specifications
Environmental Requirements
Operating Temperature 0° to 40° C (32° to 104° F)
Storage Temperature -40° to 70 ° C (-40° to 158° F)
Operating Humidity 10% to 95% relative humidity, noncondensing
Standards EN60068 to Extreme IEC68 schedule EN 300 019 (Summit
200 and Summit 400)