Extreme Networks Summit 200-24, Hardware Installation Manual

Page: 97 / 386

Summit1i, Summit5i, Summit7i, and Summit48i Switch LEDs
Extreme Networks Consolidated "i" and "e" Series Hardware Installation Guide 97
Summit1i, Summit5i, Summit7i, and Summit48i Switch
LEDs
Table 18 describes the LED activity on the Summit1i, Summit5i, Summit7i, and Summit48i switches.
Summit48i Switch
The Summit48i switch is 2U high. It has 48 autosensing 10BASE-T/100BASE-TX ports and 4
1000BASE-X ports with SC connectors (Figure 45).
Table 18: Switch LED activity for the Summit1i, Summit5i, Summit7i, and Summit48i
LED Color Indicates
Unit Status LEDs
PSU A, PSU B Green
Amber
Green/Amber blinking
Off
The indicated PSU is powered up.
The indicated PSU has a failure.
The AC power cable is not inserted correctly.
The PSU is not receiving power or no PSU is present.
MGMT Green (solid)
Green (blinking slowly)
Green (blinking quickly)
Amber
Power On Self Test (POST) or Diagnostics. PMS in progress.
The switch is operating normally.
Software download is in progress.
The switch has failed its POST or is experiencing an overheat or
fan failure.
Port Status LEDs
Green
Amber
Green blinking
Off
Link is present; port is enabled.
Frames are being transmitted/received on this port.
Link is present; port is disabled.
Link is not present.
100/1000 Mbps Speed LEDs
Green
Off
Port is operating at 1000 Mbps.
Port is operating at 100 Mbps.
10/100 Management Port LED (Summit5i and Summit7i)
Green
Amber
Off
Link is present.
Frames are being transmitted.
Link is not present.