Extreme Networks Summit 200-24, Hardware Installation Manual

Page: 176 / 386

176 Extreme Networks Consolidated "i" and "e" Series Hardware Installation Guide
Alpine 3800 Series Switch Management Module
The SMMi has the following out-of-band management ports:
• Console port—Used to connect a terminal and perform local management.
• Management port—Used to connect an Ethernet cable directly from your laptop into the
management port to view and locally manage the switch configurations.
• Modem port —Used to connect a modem for remote access to the CLI.
• PCMCIA slot—Reserved for future use.
See “Management Ports” in Chapter 1 for more information about management ports. For specifications
of the Alpine SMMi module specifications, see Appendix C, “Module Technical Specifications.”
SMMi Memory
The SMMi has two 144-pin SODIMM sockets, and ships with two 128 MB SODRAM modules installed,
as shown in Figure 98.
NOTE
The SMMi supports only the SODIMMs that are supplied by Extreme Networks.
Figure 98: SMMi SODIMM sockets
SMMi LEDs
Table 34 describes the LED activity on the SMMi.
Table 34: SMMi LEDs
LED Color Indicates
DIAG Green blinking
Off
Power-on Self Test (POST) is running
Normal operation
STATUS Green blinking
Yellow blinking
Off
Normal operation
Critical error, fan failure or over temperature
Unit powered down
PSU A
PSU B
Green
Amber
Off
PSU is OK
DC output failure
PSU not present or not powered
38_SODMs