EXFO FTB-860, User Manual

Page: 92 / 409

RFC 2544 Test Setup and Results
80
FTB-860/880
Subtests Configuration
Subtests Configuration
You can configure the Throughput, Back-to-Back, Frame Loss and Latency
test parameters from this tab.
Note:
Subtests page is not available when the Dual Test Set parameter is set to
Remote in Global Configuration on page 77.
From the
Test
menu, press
Setup
, and the
Subtests
tab.
Note: For Dual Test Set the Max. Rate and Threshold (Throughput, Back-to-Back,
and Frame Loss) fields are configurable on the Local module for both
directions: Local-to-Remote and Remote-to-Local. The remote module has
to be selected/connected to be able to set the value according its port
speed.
Subtests tab for
Dual Test Set