EXFO FTB-860, User Manual

Page: 229 / 409

FC BERT Test Setup and Results
NetBlazer
217
Interface - Port
Physical Interface

Port: Select either Port 1 or Port 2 .

Speed:
Select the fibre channel speed based on the port that you
select. If you select Port 1 , choices are as follows:

1X

2X

4X

8X

10X
If you select Port 2 , the choices are as follows:

1X

2X

4X

PSP(Link Protocol): The Primitive Sequence Protocol (PSP) allows
link management when the
PSP (Link Protocol)
check box is
selected. The port comes in active mode when the PSP (Link
Protocol)
check box is selected and the device forces the port to be in
active mode when PSP (Link Protocol) check box is not selected. The
PSP (Link Protocol)
check box is selected by default.

Frequency (MHz): Displays the frequency on which data is
transmitted. This value is displayed automatically depending on the
speed that you select.