EXFO FTB-860 User Manual Download

Page: 233 / 409

FC BERT Test Setup and Results

NetBlazer

221

Interface - Port



Discovered Topology:

There are two types of topologies: Point To

Point and Fabric.

Fabric:

Ports are interconnected to a fabric switching network.

Point To Point:

Direct link between two ports.

“–”:

When login is enabled but not initiated or the login is

unsuccessful.

When the
Discovered
Topology is Fabric,
the fabric topology
icon is displayed.

When the
Discovered Topology
is Point To Point, the
point to point
topology icon is
displayed.

Summary of Contents for FTB-860


























































































































































































































































































































































































































Search results

Summary of Contents for FTB-860

Reviews:

Related manuals for FTB-860

Brands by name

Popular brands

EXFO FTB-860, User Manual

Search results

Summary of Contents for FTB-860

Reviews:

Related manuals for FTB-860

Brands by name

Popular brands