EXFO FTB-860, User Manual

Page: 68 / 409

EtherSAM Test Setup and Results
56
FTB-860/880
Summary Results
The Summary page displays the following results.

The
Service Configuration Test
and the
Service Performance Test
field displays the current status of the respective tests. The verdict is
displayed only, if it is enabled. To set the Pass/Fail verdict, see
Pass/Fail
Verdict on the Global Configuration on page 41. The Pass/Fail verdict is
displayed on the screen with the help of the following icons:
= Pass
= Fail
The following is the list of status:

“
--
” (test has not started)

Disabled : This status will appear when the subtest is disabled.

Running
: A subtest is currently running.

Data Transfer : This status will appear when subtest is running but
no test traffic is being transmitted.

Completed : <Verdict> A sub test has completed. <Verdict>
represents the test global verdict upon completion of the sub test.

Aborted : A sub test has been aborted either manually (Stop) or by
an alarm. <Reason> represents the reason why the test has been
aborted. Possible reasons are:
Link down alarm
LOS alarm
DTS connection failed
Timeout during execution (DTS)
Unresolved addresses
No test enabled
Invalid Configuration (DTS only)
Stopped.