EXFO FTB-860, User Manual

Page: 312 / 409

Common Test Setup, Results, and Functions
300
FTB-860/880
Test Configurator - Network
IP

IP Version is not configurable and is set to IPV4 .

Automatic IP (DHCP)
check box when selected (cleared by default)
allows to dynamically obtain an IP address from a DHCP (Dynamic
Host Configuration Protocol) server.
Note:
If the Automatic IP (DHCP) check box is cleared, IP Address , Subnet
Mask
, and
Default Gateway
settings become configurable.

IP Address: Enter the IP Address for the Ethernet port. The accepted
range is from
0.0.0.0
to
255.255.255.255
. The default IP address is
10.10.0.0 .

Subnet Mask
: Enter the
Subnet Mask
for the Ethernet port. The
accepted range is from 0.0.0.0 to 255.255.255.255 . The default value is
255.255.0.0
.

Default Gateway check box when selected (cleared by default) allows
entering the
Default Gateway
address for the Ethernet port (default is
0.0.0.0 ). However, only the Default Gateway check box is available
when the
Automatic IP (DHCP)
check box is selected.