EXFO FTB-860, User Manual

Page: 361 / 409

Common Test Setup, Results, and Functions
NetBlazer
349
Logger
Following are example of detailed information reported by type of event:
Note:
The alarm events will not display any details.
Note: The Logger table can display up to 500 event entries. Once the Logger table
reports 500 event entries, the log full indicator will appear in red and no
further entries will be possible but the events in the Pending state will be
updated if a test is running.
The Event Logger information will be cleared under the following
conditions:

When the test is reset or started.

When the unit is in suspended mode.

When stopping the current test and navigating to other tests.

When the unit is restarted.
Note: The entry remains in the Pending state as long as the event is not
completed and it is highlighted in Yellow color.
Note: The Threshold Crossing events are displayed in Red color.
Type of Event Details
Test Started Start Date
Test Stopped Pass/Fail Verdict
Bit Error Events Current Count and Total Count
SDT Events Service Disruption Time
BER Threshold
Crossing Event
Value at the end of the test