EXFO FTB-860, User Manual

Page: 86 / 409

RFC 2544 Test Setup and Results
74
FTB-860/880
Configuring an RFC 2544 Test
Configuring an RFC 2544 Test
To configure the RFC 2544 test:
1.
From the
Test
menu, press
Setup
.
2. From the Test Applications tab, under Ethernet group, press
RFC 2544
.
3.
From the Interface tab, configure the Port , Network settings, and view
the information on the SFP/SFP+ page. See Interface on page 280.
Ensure that the link is up in the status bar before proceeding to the next
step.
4.
Press the Global tab. Configure the global settings. See Global
Configuration on page 77.
5.
Leave the Dual Test Set check box cleared.
6. Press the
Subtests
tab and setup each subtest. See
Subtests
Configuration on page 80.
7. Press the MAC/IP/UDP tab. Configure the stream settings. See
MAC/IP/UDP Configuration on page 302.
8. Press Start to start the test. Summary result page will be automatically
displayed. See Summary Results on page 88.
9. For additional results, refer to
Graph
on page 96,
Alarms/Errors -
Ethernet/Fibre Channel on page 329, and WIS Traces/Label on
page 343.
10.
If required, press the Report button from the side panel to generate the
report file of the results and statistics. For more details, See Test Control
on page 243.