Evoqua WALLACE & TIERNAN SFC, Original Instruction Manual

Page: 56 / 288

56
WT.050.590.000.DE.IM.0719
Functions
SFC
4.
Installing the conductivity
sensor in the flow block
assembly
1 Install the conductivity sensor in the corresponding opening on
the flow block assembly in the Y-style flow through assembly.
2 Use the appropriate accessories if installing the pressurized
version.
3 Plug in the corresponding sensor cable.
4 Then calibrate immediately.
4.2.6 Membrane sensors
Membrane sensors
The following alarm messages are configurable:
• Free chlorine - FC2
• Chlorine dioxide - CD7
• Ozone - OZ7
• Total chlorine - TC3
The membrane measuring system consists of the sensor module
("DES" for membrane sensors) including terminal strips and the
sensors. The module must be installed in the module slot of the
SFC. Various controller functions are available depending on the
slot and application selected.
All membrane systems are equipped with an integrated
temperature sensor and therefore deliver a temperature-
compensated output signal.
Picture 5 Membrane sensor
Please note
For a better overview, the commissioning, maintenance, trouble-
shooting, de-bugging and storage is listed here for each sensor.
For further information and the start-up please refer to instruction
manual „membrane sensor for free chlorine FC2“ and „membrane
sensor for total chlorine TC3“ for each membrane sensor.