Evoqua WALLACE & TIERNAN SFC, Original Instruction Manual

Page: 171 / 288

SFC
Operation
6.
171
Menu - Module type
Please note
The displayed menus and selection parameters depend on the
number of sensor measuring modules installed and the selected
application. All the parameters illustrated here are not displayed at
the same time.
Basic display
Refer to main menu
Menu select
Display of all available menus
Module type (1) menu
Display of all available settings for module type 1
Control
Actuator
Control mode Combined/single feed forw/single feed
back (combined and single feed forw
only available with modules with PC
option)
Setpoint Measuring range
Setpoint source internal/external/internal if DI 2/external
if DI 2
Dosing factor 0 – 100 %
Dos. fact source internal/external/internal if DI 2/external
if DI 2
Yout-factor 1.0 – 4.0
Control output El.Pos.w.Ym
Electr.Pos.wo.Ym
Dosing pump 2P.
Dosing pump 3P.
Solenoid pump 2P.
Solenoid pump 3P.
Analog output 2P.
Analog output 3P.
Dosing contact
Tp 10 s – 180 s (60 s)
Ty 10 s – 180 s (90 s)
Sample time T 1 – 20 s