EUROCOM NEPTUNE 4 User Manual Download

Page: 195 / 346

Modules

Overview 7 - 1

Chapter 7: Modules

Overview

This chapter contains the information on the various modules (some of which are

optional

) which may come with your computer, depending on the configuration

purchased. If you are unsure please contact your service representative.

The chapter includes information on the following:

• Setting Up SATA RAID or AHCI Mode
• PC Camera Module
• Wireless LAN Module
• Fingerprint Reader Module
• Bluetooth & WLAN Combo Module
• Trusted Platform Module
• Intel® Rapid Storage Technology
• Intel® Rapid Start Technology Driver
• Sound Blaster Audio
• Wireless Display

Summary of Contents for NEPTUNE 4



























































































































































































































































































































































Search results

Summary of Contents for NEPTUNE 4

Reviews:

Related manuals for NEPTUNE 4

Brands by name

Popular brands

EUROCOM NEPTUNE 4, User Manual

Search results

Summary of Contents for NEPTUNE 4

Reviews:

Related manuals for NEPTUNE 4

Brands by name

Popular brands