EUROCOM NEPTUNE 4 User Manual Download

Page: 309 / 346

Video Driver Controls

Intel® HD Graphics Control Panel C - 5

Intel

HD Graphics Control Panel

Advanced video configuration options are provided by the

Intel

HD Graphics

Control Panel

. To access the control panel see below and overleaf:

Click the

Intel® HD Graphics Control Panel

icon in the

Apps

screen.

(see over)



Intel® Dynamic

Video Memory

Technology

Intel® DVMT automati-
cally and dynamically al-
locates as much (up to

1748MB

) system mem-

ory (RAM) as needed to
the integrated video sys-
tem (the video driver
must be installed).

DVMT returns whatever
memory is no longer
needed to the operating
system.

Figure C - 1

Start Screen

Intel® HD Graphics

Control Panel

Summary of Contents for NEPTUNE 4



























































































































































































































































































































































Search results

Summary of Contents for NEPTUNE 4

Reviews:

Related manuals for NEPTUNE 4

Brands by name

Popular brands

EUROCOM NEPTUNE 4, User Manual

Search results

Summary of Contents for NEPTUNE 4

Reviews:

Related manuals for NEPTUNE 4

Brands by name

Popular brands