manualshive.com logo in svg

EUROCOM NEPTUNE 4, User Manual

The EUROCOM NEPTUNE 4 is a powerful gaming laptop that promises top-notch performance. To get the most out of your device, be sure to download the User Manual for free at manualshive.com. This comprehensive manual will guide you through all the features and settings of your new laptop.

Share
Download
background image

Modules

7 - 48 Trusted Platform Module

7

Infineon Security Platform Settings Tool

The Infineon Security Platform Settings Tool allows you to manage and check the
TPM state, manage your password information, and to backup and restore the TPM
data. As TPM is usually administered within large enterprises and organizations,
your system administrator will need to assist you in managing the information here.

Menus

Note that not all the
menus pictured here will
be available for access.
The menu items that ap-
pear will be dependent on
your configuration set-
tings etc. (see the 

Help

file for full details). 

Figure 7 - 34

Infineon Security 

Platform Settings 

Tool

Summary of Contents for NEPTUNE 4



























































































































































































































































































































































Reviews:

No comments

Related manuals for NEPTUNE 4

Brands by name

Popular brands

Load more brands