manualshive.com logo in svg

EUROCOM NEPTUNE 4, User Manual

The EUROCOM NEPTUNE 4 is a powerful gaming laptop that promises top-notch performance. To get the most out of your device, be sure to download the User Manual for free at manualshive.com. This comprehensive manual will guide you through all the features and settings of your new laptop.

Share
Download
background image

Modules

7 - 40 Bluetooth & WLAN Combo Module

7

4.

Make sure that Bluetooth is turned on and a list of discovered devices will appear.

5.

Double-click the device you want to pair with the computer and click 

Pair

.

6.

On first connection the computer will provide you with a pairing code to be entered 
onto the device.

7.

Enter the code into your Bluetooth enabled device and click 

Yes

 on the computer 

to complete the pairing.

8.

Select a device and click 

Remove Device

 to disconnect from any device.

Figure 7 - 27

PC and Devices - 

Bluetooth

Figure 7 - 28

Enter the Passcode

Summary of Contents for NEPTUNE 4



























































































































































































































































































































































Reviews:

No comments

Related manuals for NEPTUNE 4

Brands by name

Popular brands

Load more brands