manualshive.com logo in svg

EUROCOM NEPTUNE 4, User Manual

The EUROCOM NEPTUNE 4 is a powerful gaming laptop that promises top-notch performance. To get the most out of your device, be sure to download the User Manual for free at manualshive.com. This comprehensive manual will guide you through all the features and settings of your new laptop.

Share
Download
background image

Modules

7 - 8 Setting Up SATA RAID or AHCI Mode

7

20. You should select two identical disks to form your RAID volume.
21. If you have selected 

RAID0

 (

Stripe)

 then you can adjust the “

Strip Size” 

to your 

requirements.

22. If you have selected 

Recovery

 then you can adjust the 

Synchronization 

to “

On 

Request

” or “

Continuous

”.

23. Go to 

Create Volume

 and press <Enter>.

24. The RAID volume will then be created and the RAID information will be displayed 

under 

Intel(R) Rapid Storage Technology

 (in the 

Advanced

 menu).

Figure 7 - 4

Created RAID 

Information 

(Advanced > Intel(R) 

Rapid Storage 

Technology)

Summary of Contents for NEPTUNE 4



























































































































































































































































































































































Reviews:

No comments

Related manuals for NEPTUNE 4

Coby NBPC1220 Instruction Manual preview
NBPC1220
Brand: Coby Pages: 136

Brands by name

Popular brands

Load more brands