manualshive.com logo in svg

EUROCOM NEPTUNE 4, User Manual

The EUROCOM NEPTUNE 4 is a powerful gaming laptop that promises top-notch performance. To get the most out of your device, be sure to download the User Manual for free at manualshive.com. This comprehensive manual will guide you through all the features and settings of your new laptop.

Share
Download
background image

Video Driver Controls

C - 10 Intel® HD Graphics Control Panel

C

Click the 

Display

 menu at the top of the screen to display the sub-menus. The 

Mul-

tiple Displays

 menu allows you to configure the display mode of any attached dis-

plays (see 

“Attaching Other Displays” on page C - 21

).

Multiple Display 

At least one other dis-
play must be attached in
order to view multiple
display

 

selection op-

tions.

Figure C - 6

Intel® HD Graphics 

Control Panel 

Display Settings - 

Multiple Displays

Summary of Contents for NEPTUNE 4



























































































































































































































































































































































Reviews:

No comments

Related manuals for NEPTUNE 4

Brands by name

Popular brands

Load more brands